All Categories
- Accessories
Accessories
- Amplifiers
- Megaphones
Megaphones
- Microphones
Microphones
- PA Speakers
- Pro-Audio Speakers
- Voice Evacuation System
Voice Evacuation System
Power Source | 230 V AC, 50/60 Hz | ||
---|---|---|---|
Rated Output | 240 W | ||
Power Consumption | 252 W (IEC60065) | ||
Frequency Response | 50 Hz - 18,000 Hz (±3 dB) | ||
Distortion | Less than 0.3 % at 1 kHz, 1/3 rated power | ||
Input | MIC 1 | -52 dBV (2.5 mV), 600 Ω, unbalanced, Equivalent to phone jack | |
MIC 2 | -52 dBV (2.5 mV), 600 Ω, unbalanced, Equivalent to phone jack | ||
MIC 3 | -52 dBV (2.5 mV), 600 Ω, unbalanced, Equivalent to phone jack | ||
AUX 1 | -10 dB* (316 mV), 10 kΩ, unbalanced, RCA pin jack | ||
AUX 2 | -10 dB* (316 mV), 10 kΩ, unbalanced, RCA pin jack | ||
Output | Speaker Out | Speaker Outputs plug in screw connector | |
Direct Line | 100V | 42 Ω | |
4-16 Ω | 4-16 Ω | ||
Speaker Selector | 5-zone selector (all zones simultaneously selectable), screw type terminal | ||
1 all call | |||
Pre Out | 0 dBV (1.0 V), 600 Ω, unbalanced, RCA pin jack | ||
S/N Ratio | Over 65 dB (MIC 1 - MIC 3) | ||
Over 75 dB (AUX 1 - AUX 2) | |||
Tone Controls | Bass: ±10 dB at 100 Hz Treble: ±10 dB at 10 kHz | ||
Muting | MIC 1 overrides other input signals with 0 - 40 dB attenuation by voice switch of MIC 1 input level | ||
Indicators | Power LED, Signal LED | ||
Finish | Front Panel: ABS resin, Color Black Case: Steel plate, Painting Black | ||
Dimensions | 420 (W) × 110 (H) × 384 (D) mm | ||
Weight | 12.8 kg | ||
Accessory | AC Power cord (1 pc) |
SKU | ZA-1240SS |
---|